E-mon Energy Software Instrukcja Użytkownika Pobierz pdf (Strona 134)

Other Features

E-Mon Energy User Manual 13-3

E-MON

Recorder

The Recorder feature allows the user to set up global parameters for the Sampling Rate, Peak Demand

Interval, Rolling Demand window, and the Demand Synchronized Window. For additional information, see

the section on Recorders within this manual.

Figure 13.2 - Recorder Parameters

Panel Group/Field Description

Recorder Parameters Panel Group

Name*

Type in a unique name to identify your Recorder Parameters. The

name can be up to 20 characters. This is a required field. This name

will be referenced in the Group and/or Location tabs of the Database

window.

Description Type in a description to identify the Recorder Parameters.

Profile Interval

Select the profile interval of 5-Minute or 15-minute. This sets the

sampling rate for the recorder. The sampling rate will affect the

number of days that can be stored inside the recorder. When the

storage is used up, the recorder will flush out the oldest data on a day

block basis. This is also known as FIFO (first-in-first-out).

Peak Demand

Select the Peak Demand window of 15-minute, 30-minute, or 60-

minute. This selection will affect the calculation for peak demand.

Rolling Demand

Select the Rolling Demand window of 5-minute, 15-minute, or Reset

at EOI. This selection will affect the calculation for peak demand.

Note: The Rolling Demand window cannot be less than the Profile

Interval.

End of Interval

Select the End of Interval signal using Built-in Clock or External

Clock. Note: Some hardware does not support an External Clock.

Time Adjustment

Select Time Adjustment for synchronizing the recorder/meter clock

with the PC clock. When the time is within this range, E-Mon

Energy™ will set the recorder/meter clock to the same time as the PC.

1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 222 223

Brak uwag

E-mon Energy Software Instrukcja Użytkownika Strona 134